Text preview for : Panel_AUO_B140XTN01-0_0_[DS].pdf part of . Various Panel AUO B140XTN01-0 0 [DS] . Various LCD Panels Panel_AUO_B140XTN01-0_0_[DS].pdf



Back to : Panel_AUO_B140XTN01-0_0_[ | Home

Global LCD Panel Exchange Center www.panelook.com


Product Specification
AU OPTRONICS CORPORATION


(V ) Preliminary Specifications
( ) Final Specifications


Module 14.0" HD Color TFT-LCD with LED Backlight design

Model Name B140XTN01.0 (H/W:0A)

Customer Acer

Note ( ) LED Backlight with driving circuit design




Customer Date Approved by Date



Claire Yu 10/28/2011




Checked &
Date Prepared by
Approved by



Yama Chen 10/28/2011




Note: This Specification is subject to change without NBBU Marketing Division /
notice. AU Optronics corporation




B140XTN01.0 Document Version : 0.2 1 of 37


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


Product Specification
AU OPTRONICS CORPORATION

Contents
3UHOLPLQDU\ VSHF
+DQGOLQJ 3UHFDXWLRQV
*HQHUDO 'HVFULSWLRQ
2.1 General Specification ..........................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................6
)XQFWLRQDO %ORFN 'LDJUDP
$EVROXWH 0D[LPXP 5DWLQJV
4.1 Absolute Ratings of TFT LCD Module.............................................................................................12
4.2 Absolute Ratings of Environment .....................................................................................................12
(OHFWULFDO FKDUDFWHULVWLFV
5.1 TFT LCD Module..............................................................................................................................13
5.2 Backlight Unit ...................................................................................................................................18
6LJQDO &KDUDFWHULVWLF
6.1 Pixel Format Image ...........................................................................................................................19
6.3 Integration Interface and Pin Assignment..........................................................................................20
6.4 Interface Timing ................................................................................................................................23
6.5 Power ON/OFF Sequence ...............................................................................................................234
&RQQHFWRU 'HVFULSWLRQ
7.1 TFT LCD Module..............................................................................................................................26
/(' 'ULYLQJ 6SHFLILFDWLRQ
8.1 Connector Description.......................................................................................................................27
8.2 Pin Assignment..................................................................................................................................27
9LEUDWLRQ DQG 6KRFN 7HVW
9.1 Vibration Test ....................................................................................................................................28
9.2 Shock Test Spec:................................................................................................................................28
5HOLDELOLW\
0HFKDQLFDO &KDUDFWHULVWLFV
11.1 LCM Outline Dimension .................................................................................................................30
11.2 Screw Hole Depth and Center Position ...........................................................................................31
6KLSSLQJ DQG 3DFNDJH
12.1 Shipping Label Format ....................................................................................................................32
12.2 Carton package ................................................................................................................................33
12.3 Shipping package of palletizing sequence.......................................................................................33
$SSHQGL[ (',' GHVFULSWLRQ




B140XTN01.0 Document Version : 0.2 2 of 37


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


Product Specification
AU OPTRONICS CORPORATION



Record of Revision

Rema
Version and Date Page Old description New Description
rk
0.1 2011/07/29 All Preliminary release

0.2 2011/10/28 20 Update pin assignment Update pin assignment

32 Update Z40 shipping label Update Z40 shipping label




B140XTN01.0 Document Version : 0.2 3 of 37


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


Product Specification
AU OPTRONICS CORPORATION


1. Handling Precautions

1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electronic breakdown.




B140XTN01.0 Document Version : 0.2 4 of 37


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


Product Specification
AU OPTRONICS CORPORATION


2. General Description
B140XTN01.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the HD
(1477(H) x 768(V)) screen and 262k colors (RGB 6-bits data driver) with LED backlight driving
circuit. All input signals are Display Port interface compatible.
B140XTN01.0 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:


Items Unit Specifications
Screen Diagonal [mm] 354.95 (14.0W")
Active Area [mm] 309.40 X 173.95

Pixels H x V 1366x3(RGB) x 768

Pixel Pitch [mm] 0.2265X0.2265

Pixel Format R.G.B. Vertical Stripe

Display Mode Normally White

White Luminance (ILED=20mA) [cd/m2] 200 typ. (5 points average)
(Note: ILED is LED current) 170 min. (5 points average)
Luminance Uniformity 1.25 max. (5 points)
Contrast Ratio 500 typ
Response Time [ms] 8 typ / 16 Max
Nominal Input Voltage VDD [Volt] +3.3 typ.
Power Consumption [Watt] 4.3 max. (Include Logic and Blu power)
Weight [Grams] 350 max.
Physical Size without inverter, [mm] Min. Typ. Max.
bracket. Length 323 323.5 324
Width 191.5 192 192.5
Thickness 5.2
Glass thickness [mm] 0.5
Electrical Interface 1 channel Display Port
Surface Treatment Glare, Hardness 3H,

Support Color 262K colors ( RGB 6-bit )



B140XTN01.0 Document Version : 0.2 5 of 37


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


Product Specification
AU OPTRONICS CORPORATION
Temperature Range
Operating [oC] 0 to +50
Storage (Non-Operating) [oC] -20 to +60
RoHS Compliance RoHS Compliance



2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature) :
Item Symbol Conditions Min. Typ. Max. Unit Note
White Luminance 5 points average 1, 4,
170 200 - cd/m2 5.
ILED=20mA
R Horizontal (Right) 40 45 -
degree
L CR = 10 (Left) 40 45 -
Viewing Angle 4, 9
H Vertical (Upper) 10 15 -
L CR = 10 (Lower) 30 35 -
Luminance
5P 5 Points - - 1.25 1, 3, 4
Uniformity
Luminance
13P 13 Points - - 1.50 2, 3, 4
Uniformity
Contrast Ratio CR 400 500 - 4, 6
Cross talk % 4 4, 7
Tr Rising - - -
Response Time Tf Falling - - - msec 4, 8
TRT Rising + Falling - 8 16
Rx 0.560 0.590 0.620
Red
Ry 0.315 0.345 0.375
Gx 0.300 0.330 0.360
Color / Green
Gy 0.530 0.560 0.590
Chromaticity
Coodinates Bx CIE 1931 0.120 0.150 0.180 4
Blue -
By 0.110 0.140 0.170
Wx 0.283 0.313 0.343
White
Wy 0.299 0.329 0.359
NTSC % - 45 -




B140XTN01.0 Document Version : 0.2 6 of 37


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


Product Specification
AU OPTRONICS CORPORATION

Note 1: 5 points position (Ref: Active area)

W
W /4 W /4 W /4 W /4



H /4

1 2
H /4

H 3

H /4

4 5

H /4




Note 2: 13 points position (Ref: Active area)

W

W /4 W /4 W /4 W /4
10 10

10
1 2 3
H /4

4 5

H /4

H 6 7 8

H /4

9 10

H /4 11 12 13
10



Note 3: The luminance uniformity of 5 or13 points is defined by dividing the maximum luminance values by the
minimum test point luminance

Maximum Brightness of five points
W5 =
Minimum Brightness of five points

Maximum Brightness of thirteen points
W13 =
Minimum Brightness of thirteen points

Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change
during measuring. In order to stabilize the luminance, the measurement should be executed after lighting



B140XTN01.0 Document Version : 0.2 7 of 37


One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com


Product Specification
AU OPTRONICS CORPORATION

Backlight for 30 minutes in a stable, windless and dark room, and it should be measured in the center of screen.! !


Photo detector




Field=2




50 cm




LCD Panel TFT-LCD Module




Center of the screen
Note 5 Definition of Average Luminance of White (YL):


Measure the luminance of gray level 63 at 5 points YL = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L (x) is corresponding to the luminance of the point X at Figure in Note (1).



Note 6 Definition of contrast ratio:
Contrast ratio is calculated with the following formula.

Brightness on the "White" state
Contrast ratio (CR)=
Brightness on the "Black" state




Note 7 Definition of Cross Talk (CT)
CT = | YB