Text preview for : Panel_LG_Display_LC320EXJ-SEE1_0_[DS].pdf part of . Various Panel LG Display LC320EXJ-SEE1 0 [DS] . Various LCD Panels Panel_LG_Display_LC320EXJ-SEE1_0_[DS].pdf
Back to : Panel_LG_Display_LC320EXJ | Home
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
SPECIFICATION
FOR
APPROVAL
( ) Preliminary Specification
( ) Final Specification
Title 32.0" WXGA TFT LCD
BUYER Quatius SUPPLIER LG Display Co., Ltd.
MODEL *MODEL LC320EXJ
SUFFIX SEE1 (RoHS Verified)
*When you obtain standard approval,
please use the above model name without suffix
SIGNATURE SIGNATURE
APPROVED BY APPROVED BY
DATE DATE
/ J.T. Kim / Team Leader
REVIEWED BY
/ S.Y. Lee / Project Leader
PREPARED BY
/ Q-H. Jo / Engineer
Please return 1 copy for your confirmation with TV Product Development Dept.
your signature and comments. LG Display Co., Ltd.
Ver. 1.0 1 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
CONTENTS
Number ITEM Page
COVER 1
CONTENTS 2
RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTERISTICS 6
3-2 INTERFACE CONNECTIONS 7
3-3 SIGNAL TIMING SPECIFICATIONS 8
3-4 SIGNAL TIMING WAVEFORMS 9
3-5 COLOR DATA REFERENCE 12
3-6 POWER SEQUENCE 13
4 OPTICAL SPECIFICATIONS 14
5 MECHANICAL CHARACTERISTICS 17
6 MECHANICAL DIMENSION 18
6-1 BOARD ASSEMBLY DIMENSION 18
6-2 CONTROL BOARD ASSEMBLY DIMENSION 19
7 RELIABILITY 20
8 INTERNATIONAL STANDARDS 21
8-1 ENVIRONMENT 21
9 PACKING 22
9-1
91 PACKING FORM 22
10 PRECAUTIONS 23
10-1 ASSEMBLY PRECAUTIONS 23
10-2 OPERATING PRECAUTIONS 23
10-3 ELECTROSTATIC DISCHARGE CONTROL 24
10-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 24
10-5 STORAGE 24
10-6 OPERATING CONDITION GUIDE 24
Ver. 1.0 2 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
RECORD OF REVISIONS
Revision No. Revision Date Page Description
0.0 Apr. 30, 2012 - Preliminary Specification (First Draft)
Ver. 1.0 3 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
1. General Description
The LC320EXJ is a Color Active Matrix Liquid Crystal Display with an integral the Source PCB and Gate
implanted on Panel (GIP). The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 31.5 inch diagonally measured
active display area with WXGA resolution (768 vertical by 1366 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
Therefore, it can present a palette of more than 16.7M(6bit + A-FRC) colors.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important
important.
RGB
EEPROM
Source Driver Circuit
SCL SDA
S1 S1366
LVDS Select #9
G1
CN1
LVDS 1Port (30pin) Timing Controller
[LVDS Rx] Control TFT - LCD Panel
Signals
+12.0V (1366 RGB 768 pixels)
[Gate In Panel]
G768
Power Circuit
Block Power Signals
General Features
Active Screen Size 31.5 inches(800.4mm) diagonal
Outline Dimension 715.0mm(H) x 411.0mm(V) x 1.4mm(D) (Typ.)
Pixel Pitch 0.51075 X 0.51075
Pi l Format
Pixel F t h i b
1366 horiz. by 768 vert. pixels RGB stripe arrangement
t i l ti t
Color Depth 8bit(D), 16,7 M colors
Source D-IC : 6-bit mini-LVDS, gamma reference voltage, and control signals
Drive IC Data Interface
Gate D-IC : Gate In Panel
Transmittance (With POL) 5.62 %(Typ.)
Viewing Angle (CR>10) Viewing angle free ( R/L 178 (Min.), U/D 178 (Min.))
Weight 1.10Kg (Typ.)
Display Mode Transmissive mode, Normally black
Surface Treatment (Top) Hard coating(3H), Anti-glare treatment (Haze 1%)
Ver. 1.0 4 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
2. Absolute Maximum Ratings
g
The following items are maximum values which, if exceeded, may cause faulty operation or damage to the
LCD module.
Table 1. ABSOLUTE MAXIMUM RATINGS
Value
Parameter Symbol Unit Remark
Min Max
Power Input voltage VLCD -0.3 +14.0 V [DC]
Panel Front Temperature TSUR - +68 C 4
Operating Temperature TOP 0 +50 C
Storage Temperature TST -20 +60 C
2,3
Operating Ambient Humidity HOP 10 90 %RH
Storage Humidity HST 10 90 %RH
Note: 1. Ambient temperature condition (Ta = 25 r 2 C )
2. Temperature and relative humidity range are shown in the figure below. Wet bulb temperature
should be Max 39 C and no condensation of water.
3. Gravity mura can be guaranteed below 40 condition.
4. The maximum operating temperature is based on the test condition that the surface temperature
of display area is less than or equal to 68 with LCD module alone in a temperature controlled
chamber. Thermal management should be considered in final product design to prevent the surface
temperature of display area from being over 68 . The range of operating temperature may
degrade in case of improper thermal management in final product design.
90%
60
60%
50 Storage
Humidity [(%)RH]
Wet Bulb
Temperature [ C]
40
40%
Operation
30
20
10
0
10%
-20 0 10 20 30 40 50 60 70 80
Dry Bulb Temperature [ C]
Ver. 1.0 5 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
3. Electrical Specifications
3-1. El t i l Ch
3 1 Electrical Characteristics
t i ti
It requires two power inputs. One is employed to power for the LCD circuit.
Table 2. ELECTRICAL CHARACTERISTICS
Value
Parameter Symbol Unit Note
Min Typ Max
Circuit :
Power Input Voltage VLCD 10.8 12.0 13.2 VDC
- 340 445 mA 1
Power Input Current ILCD
- 430 560 mA 2
Power Consumption PLCD - 4.08 5.30 Watt 1
Rush current IRUSH - - 3.0 A 3
Notes : 1. The specified current and power consumption are under the VLCD=12.0V, 25 r 2 C, fV=60Hz
condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency.
2. The current is specified at the maximum current pattern.
3. The duration of rush current is about 2ms and rising time of power input is 0.5ms (min.).
4. Ripple voltage level is recommended under 5% of typical voltage.
White : 255Gray
Black : 0Gray
Mosaic Pattern(8 x 6)
Ver. 1.0 6 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
3-2. Interface Connections
3-2-1. LCD Module
- LCD Connector(CN1) : KDF71G-30S-1H(Hirose) or FI-X30SSL-HF(JAE)
- Mating Connector : : FI-X30C2L (Manufactured by JAE) or Equivalente
Table 3. MODULE CONNECTOR(CN5) PIN CONFIGURATION
Pin No. Symbol Description Note
1 VLCD Power Supply +12.0V
2 VLCD Power Supply +12.0V
3 VLCD Power Supply +12.0V
4 VLCD Power Supply +12.0V
5 GND Ground
6 GND Ground
7 GND Ground
8 GND Ground
9 LVDS Select H =JEIDA , L or NC = VESA Appendix IV
10 No Connection 4
11 GND Ground
12 RA- LVDS Receiver Signal(-)
13 RA+ LVDS Receiver Signal(+)
14 GND Ground
15 RB- LVDS Receiver Signal(-)
16 RB+ LVDS Receiver Signal(+)
17 GND Ground
18 RC- LVDS Receiver Signal(-)
19 RC+ LVDS Receiver Signal(+)
20 GND Ground
21 RCLK- LVDS Receiver Clock Signal(-)
22 RCLK+ LVDS Receiver Clock Signal(+)
23 GND Ground
24 RD- LVDS Receiver Signal(-)
25 RD+ LVDS Receiver Signal(+)
26 GND Ground
27 No Connection 4
28 No Connection 4
29 No Connection 4
30 GND Ground
Notes : 1. All GND (Ground) pins should be connected together to the LCD module's metal frame.
2. All VLCD (power input) pins should be connected together.
3. All Input levels of LVDS signals are based on the EIA 644 Standard.
4. These pins are used only for LGD (Do not connect)
5. Specific pin No. #30 is used for "No signal detection" of system signal interface.
It should be GND for NSB (No Signal Black) while the system interface signal is not.
If this pin is "H", LCD Module displays AGP (Auto Generation Pattern).
Ver. 1.0 7 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
3-3. Signal Timing Specifications
Table 4 shows the signal timing required at the input of the LVDS transmitter. All of the interface signal
timings should be satisfied with the following specification for normal operation.
ITEM Symbol Min Typ Max Unit Note
Display
tHV - 1366 - tclk
Period
Horizontal Blank tHB 90 162 410 tclk
Total tHP 1456 1528 1776 tclk
Display
tVV - 768 - tHP
Period
20 22 240
Vertical Blank tVB tHP 1
(126) (180) (295)
788 790 1008
Total tVP tHP
(894) (948) (1063)
ITEM Symbol Min Typ Max Unit Note
DCLK fCLK 63.0 72.4 80.0 MHz
Horizontal fH 45 47.4 55 KHz 2
Frequency 2
57 60 63 NTSC :
Vertical fV Hz
(47) (50) (53) 57~63Hz
(PAL : 47~53Hz)
Note: 1. The input of HSYNC & VSYNC signal does not have an effect on normal operation (DE Only Mode).
d t f EMI dd dditi l l k to i i l for l k i
If you use spread spectrum of EMI, add some additional clock t minimum value f clock margin.
2. The performance of the electro-optical characteristics may be influenced by variance of the vertical
refresh rate and the horizontal frequency
Timing should be set based on clock frequency.
Ver. 1.0 8 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
3-4. Signal Timing Waveforms
3-4-1.
3 4 1 LVDS I
Input Si
t Signal Ti i Di
l Timing Diagram
0.7VDD
DE, Data
0.3VDD
tCLK
DCLK 0.5 Vcc
Valid data
1366 Invalid data 1 1366 Invalid data
DE(Data Enable)
tHV
tHT
DE(Data Enable)
768 1 768
tVV
tVT
Ver. 1.0 9 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
3-4-2. LVDS Input Signal Characteristics
1) DC Specification
S ifi ti
LVDS -
LVDS +
V CM V IN _ MAX V IN _ MIN
# V CM = {( LVDS +) + ( LVDS - )} /2
)
0V
Description Symbol Min Max Unit Note
LVDS Common mode Voltage VCM 1.0 1.5 V -
LVDS Input Voltage Range VIN 0.7 1.8 V -
Change in common mode Voltage VCM - 250 mV -
2) AC Specification
Tclk
LVDS Clock
A
LVDS Data
( F clk = 1 /T clk )
tSKEW tSKEW
A
Tclk
LVDS 1'st Clock 80%
LVDS 2nd / 3rd / 4th Clock
20%
tRF
tSKEW_min tSKEW_max
Description Symbol Min Max Unit Note
High Threshold VTH 100 300 mV
LVDS Differential Voltage 3
Low Threshold VTL -300 -100 mV
LVDS Clock to Data Skew tSKEW - |(0.20*Tclk)/7| ps -
LVDS Clock/DATA Rising/Falling time tRF 260 |(0.3*Tclk)/7| ps 2
Effective time of LVDS teff | 360| - ps -
LVDS Clock to Clock Skew (Even to Odd) tSKEW_EO - |1/7* Tclk| ps -
Note 1. All Input levels of LVDS signals are based on the EIA 644 Standard.
2. If tRF isn't enough, teff should be meet the range.
3. LVDS Differential Voltage is defined within teff
Ver. 1.0 10 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
360ps
0.5tui tui
V+
data
VTH
Vcm
VTL
V
V-
360ps
data
teff
V+ tui : Unit Interval
clk
Vcm
V-
clk
Ver. 1.0 11 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
3-5. Color Data Reference
The brightness of each primary color (Red, Green, Blue) is based on the 8-bit gray scale data input for the color.
The higher binary input, the brighter the color. Table 5 provides a reference for color versus data input.
Table 5. COLOR DATA REFERENCE
Input Color Data
RED GREEN BLUE
Color
MSB LSB MSB LSB MSB LSB
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Basic Blue (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Color Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
RED (000) Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED (001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED ... ... ... ...
RED (254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED (255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN (000) Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN (001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
GREEN ... ... ... ...
GREEN (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
GREEN (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
BLUE (000) Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
BLUE (001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
BLUE ... ... ... ...
BLUE (254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
BLUE (255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Ver. 1.0 12 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
3-6. Power Sequence
3 6 1.
3-6-1 LCD Driving circuit
90% 90%
Power Supply For LCD
VLCD 0V 10% 10% 10%
T8
T1
T5
T2
Valid Data Vcm
V : LVDS Common mode Voltage
C d V lt
Interface Signal (Tx_clock) 30%
0V
100% T3 T4
User Control Signal T6
(LVDS_select)
Power for B/L T7 B/L ON
Table 6. POWER SEQUENCE
Value
Parameter Unit Notes
Min Typ Max
T1 0.5 - 20 ms 1
T2 0 - - ms 2
T3 200 - - ms 3
T4 200 - - ms 3
T5 1.0 - - s 4
T6 - - T2 ms 5
T7 0.5 - - s 6
T8 100 - - ms 7
Note : 1. Even though T1 is over the specified value, there is no problem if I2T spec of fuse is satisfied.
2. If T2 is satisfied with specification after removing LVDS Cable, there is no problem.
3. The T3 / T4 is recommended value, the case when failed to meet a minimum specification,
abnormal display would be shown. There is no reliability problem.
4. T5 should be measured after the Module has been fully discharged between power off and on period.
5. If the on time of signals (Interface signal and user control signals) precedes the on time of Power (VLCD),
it will be happened abnormal display. When T6 is NC status, T6 doesn't need to be measured.
6. If there is no abnormal display, no problem.
7. It is recommendation specification that T8 has to be 100ms as a minimum value.
Please avoid floating state of interface signal at invalid period.
When the power supply for LCD (VLCD) is off, be sure to pull down the valid and invalid data to 0V.
Ver. 1.0 13 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
4. Optical Specification
Optical characteristics are determined after the unit has been `ON' and stable in a dark environment at 25 2 C.
The values are specified at distance 50cm from the LCD surface at a viewing angle of ) and T equal to 0 .
FIG. 1 shows additional information concerning the measurement equipment and method.
LCD Module Pritchard 880 or
Optical Stage(x,y)
equivalent
50cm
FIG. 1 Optical Characteristic Measurement Equipment and Method
Table 7. OPTICAL CHARACTERISTICS Ta= 25 2 C, VLCD=12.0V, fV=60Hz, Dclk=72.4MHz
Backlight : LGD B/L
Value
Parameter Symbol Unit Note
Min Typ Max
Contrast Ratio CR 850 1200 - 1
Variation G to G 6 9 3
Response Time
Gray to Gray (BW) G to G BW 9 13 ms 2
Rx 0.637
RED
Ry 0.341
Color Coordinates Gx Typ 0.318 Typ
GREEN
[CIE1931] Gy -0.03 0.599 +0.03
Bx 0.153
BLUE
By
y 0.057
Viewing Angle (CR>10)
x axis, right(I=0 ) Tr 89 - -
x axis, left (I=180 ) Tl 89 - -
degree 4
y axis, up (I=90 ) Tu 89 - -
y axis, down (I=270 ) Td 89 - -
Gray Scale - - - 5
Ver. 1.0 14 /34
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LC320EXJ
Product Specification
Note : 1. Contrast Ratio(CR) is defined mathematically as :
Surface Luminance with all white pixels
Contrast Ratio =
Surface Luminance with all black pixels
It is measured at center 1-point.
. Surface luminance is determined after the unit has been `ON' and 1Hour after lighting the
backlight in a dark environment at 25 2 C. Surface luminance is the luminance value at center
1-point across the LCD surface 50cm from the surface with all pixels displaying white.
For more information see the FIG. 1.
2. Response time is the time required for the display to transit from any g y to white (
y y gray (Rise Time, TrR)
and from any gray to black (Decay time, TrD). For additional information see the FIG. 2.
G to GBW Spec stands for average value of all measured points.
Photo Detector : RD-80S / Field : 2
3. G to G is Variation of Gray to Gray response time composing a picture
Xi = Individual Data
G to G ( ) =