Text preview for : BO6010-TE.pdf part of MAKITA BO6010-TE MAKITA BO6010-TE.pdf
Back to : BO6010-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. BO6010
New Tool
Description MAKITA 150mm Double Action Sander
CONCEPTION AND MAIN APPLICATIONS
While the existing orbital sanders grind only by its orbital
movement, we developed the new sander with the features of
Orbital Sander and Disk Sander respectively by double
action function which is made of orbital movement plus
rotating movement. Or we might say the factors of Disk Sander
are included into Orbital Sander.
External drawing
Specifications
Voltage Current(A) Frequency(Hz) Consumed power(W)
Single phase 100V 2.2 50-60 210
No load speed Rotation per minute (/min.) 7000
Pad Size(mm) 150
Weight(kg) 1.8
Overall length(mm) 304
Cord length(mm) 2.5
Standard equipment
Sanding disk 150-60 2pcs
Sanding disk 150-100 2pcs
Sanding disk 150-150 2pcs
Optional accessories
Name Outer diameter-Grain level Item No. Packed Pieces
Sanding Disk 150-60 7420988 10 pcs
Sanding Disk 150-100 7420996 10 pcs
Sanding Disk 150-120 7421015 10 pcs
Sanding Disk 150-150 7421007 10 pcs
Sanding Disk 150-180 7421023 10 pcs
Features and benefits
1.High Efficiency, Beautiful Finish
Owing to the rotation + orbital movement of pad, the grinding efficiency is very high and the finish is so beautiful.
2.Flat Ground Surface
When you grind by Disk Sander, sometimes there is difference in level around the circumference of paper or you
grind too much, and it is difficult to get a flat finished surface. However, you can grind flat and uniformly by this
machine because the pad moves in orbit and the whole sides of pad can be applied to the ground face.
3.Using Sanding Paper with adhesive
Since the sanding disk paper with adhesive is used, you can attach and remove. Easily without tools, and the paper
comes off perfectly because of the special shape of pad surface.
4.Small and Light Weight
The body weight is very light, 1.8kgs, and the vibration is small. So, you can operate it for long hours without
exhaustion.
The standard equipment for the tools shown may differ from country to country.
Repair
(1) How to remove pads
Insert Spanner 13 into the chamfer, turn the pad to left, and the pad can be removed.
(2) How to remove Ball bearing #6201LLB in Spindle
When you remove Ballbearing6201LLB inserted into Spindle,
first take off R-32 (hole) and put the chamfer of connector
between vices so that it may not be damaged. Then hit the
circumference of Spindle by hammer, and you can take out the
Bearing.
Retaining ring(shift)s-12
Ball bearing 6201LLB
Spindle
Dust cover
Connector Retaining ring R-3