Text preview for : DC1411-TE.pdf part of MAKITA DC1411-TE MAKITA DC1411-TE.pdf
Back to : DC1411-TE.pdf | Home
T ECHNICAL INFORMATION New Tool
For Models DC1411
Description Fast Charger
CONCEPTION AND MAIN APPLICATIONS
This newly developed charger to take the place of the current model
DC1410 has the following new features:
(3-5
92m 8")
1.This charger can charge MAKITA Ni-MH batteries
/
m
(NICKEL METAL HYDRIDE BATTERY)
(3-5/64")
78mm
as well as MAKITA Ni-MH batteries.
The following MAKITA Ni-MH batteries
with an increased capacity of 2.2 Ah are available now:
7.2V/Battery 7033,9.6V/Battery 9033 and Battery 9133,
12V/Battery 1233,14.4V/Battery 1433 193mm ")
32
(7-19/
2.This charger has a trickle charging function for a battery
to be always fully charged and ready for use.
Specifications
Voltage(V) Current(A) Input
115V 50/60Hz 55W
220-240V 50/60Hz 48W
Capacity
Output voltage : DC7.2V,9.6V,12V,14.4V
Output current : DC2.1A
Charging time : 40min.for 1.3Ah battery(Battery 7000,7100,7120,9000,9100,9100A,9120,1200,1200A,1210,1220)
50min.for 1.7Ah battery(Battery 7001,9001,9101,9101A,1201,1201A,1211)
60min.for 2.0Ah battery(Battery 7002,9002,9102A,9122,1202,1202A,1222,1422)
65min.for 2.2Ah battery(Battery 7033,9033,9133,1233,1433)
Net weight : 0.41Kg(0.90lbs)
Cord length : 2.0m(6.6ft)
Repair
The delivery of charging circuit of DC1410/LG123 for repair has been stopped
because of starting production of DC1411/LG124 and the charging circuit of
For Low Voltage : gray
DC1411/LG124 is to be used for replacement. Note that you should remove one
For High Voltage Yellow
charging terminal as shown in the figure below when replacing a charging circuit of
DC1410/lG123.
Cut by Nipper
Remove one charging terminal
Red
Black White
Charging circuit