Text preview for : Service Bulletin OSTUS 003.PDF part of DENON Service Bulletin OSTUS 003 DENON CD Player CD Player Denon - DCM-390 & 290 & 27 & 500AE Service Bulletin OSTUS 003.PDF
Back to : Service Bulletin OSTUS 00 | Home
100 Corporate Drive Mahwah, NJ 07430
Service Bulletin
No. : OST- US 003
Date: February 26, 2007
_____________________________________________________________
Model: DCM-290, DCM390
Subject: Mechanism Alignment Procedure
Symptom: A mechanical Alignment (timing) procedure is not shown in the
service manual.
Solution: See the following information for alignment details.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
The DRIVE GEAR must be aligned before re-assembling the set. To align the
DRIVE GEAR (ref. # 12-8), locate the hole on the outer portion of the gear and
align it with the hole in the BASE (ref. # 12-6) chassis.
Next, Install the MIDDLE and TRANSFER GEARS, there is no alignment
required for these two gears.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
Then, Install the DISC TRAY. Align the DISC TRAY so slot #4 is centered over
the Traverse Mechanism.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.