Text preview for : SONY ERICSSON T226, T230, T238 5.pdf part of Sony Ericsson T226, T230, T238 5 Sony Ericsson Mobile Phones Сотовый телефон Sony Ericsson T226 & T230 & T238 SONY ERICSSON T226, T230, T238 5.pdf



Back to : SONY ERICSSON T226, T230, | Home

Process Flow, SP/Mech




Process Flow, SP/Mech
Applicable for T226, T230, T238
Contents
1 Abstract............................................................................................................................2
2 Process Flow ....................................................................................................................2
3 Process Descriptions .......................................................................................................3
4 Revision History ..............................................................................................................3




000 21-1/FEA 209 544/574 B Approved according to 000 21-LXE 107 42/1
Sony Ericsson Mobile Communications AB
Process Flow, SP/Mech


1 Abstract
This document describes the general processes the repair center should perform and the main
FEA documents that describe each process. The actual flow of a phone through a repair
center may vary.

2 Process Flow

Unit In




Pass
Arrival Test


Fail
Cause of Failure Not Found or Not
Troubleshooting Reparable At This Level



Cause of Failure Not
Repair Reparable At This Level




Mandatory Hardware
Upgrades If Needed



Flash Software
Upgrade if Needed



Update Label if
Needed




Fail
Final Test


Pass

Unit Out Next Repair Level




000 21-1/FEA 209 544/574 B 2(3)
Sony Ericsson Mobile Communications AB
Process Flow, SP/Mech


3 Process Descriptions
Process Key Reference Documents Comments
Unit In NA Process the phone according to local
requirements.
Copy user data from the phone
according to local requirements.
Arrival Test Test Instruction, SP/Mech Try to confirm the customer's
complaint or identify a failure by
performing the functional tests.
Troubleshooting Trouble Shooting Guide, SP/Mech Try to determine the cause of the
failure.
Repair Working Instruction, SP/Mech Try to repair the phone.
Flashing the latest software into the
phone at this point may solve some
problems.
Mandatory Hardware Product Change Survey, SP/Mech Replace parts as required.
Upgrades if Needed
Flash Software Test Instruction, SP/Mech Flash the latest software into the
Upgrade if Needed phone.
Update Label if Working Instruction, SP/Mech Print and apply a new label if
Needed required.
Final Test Test Instruction, SP/Mech Confirm that the phone works
properly by performing the functional
tests.
Unit Out NA Load user data into the phone if
needed.
Process and package the phone
according to local requirements.
Next Repair Level NA If the cause of the failure cannot be
found or is not reparable at this level,
then send the phone to the next repair
level, or return it to the customer at
the customer's request.


4 Revision History
Rev. Date Changes / Comments
A 2003-08-05 Initial Release
B 2003-09-29 Corrected "Flash Software if Needed" to include "Upgrade




000 21-1/FEA 209 544/574 B 3(3)
Sony Ericsson Mobile Communications AB