Text preview for : f313adjust.pdf part of LG f313adjust LG Audio ffh-313 f313adjust.pdf



Back to : f313adjust.pdf | Home

ADJUSTMENTS
This set has been aligned at the factory and normally will not require further adjustment. As a result, it is not
recommended that any attempt is made to modificate any circuit. If any parts are replaced or if anyone tampers
with the adjustment, realignment may be necessary.


IMPORTANT
1. Check Power-source voltage.
2. Set the function switch to band being aligned.
3. Turn volume control to minimum unless otherwise noted.
4. Connect low side of signal source and output indicator to chassis ground unless otherwise specified.
5. Keep the signal input as low as possible to avoid AGC and AC action.


TEST & ADJUSTMENT POINT




L403 VR401
(Rec Bias) (Adjustment Point)


Figure 1. Main P.C. Board




-8-
TAPE DECK ADJUSTMENT
1. AZIMUTH ADJUSTMENT

Deck Mode Test Tape Test Point Adjustment Adjust for
A Deck Playback MTT-114 Speaker Out Azimuth Screw Maximum
B Deck Playback MTT-114 Speaker Out Azimuth Screw Maximum


Electronic Dual-trace
Voltmeter synchroscope

Head
Playback Mode
Speaker Out
L out
L ch CH1 CH2

Test Tape Unit
MTT-114 R ch GND


R out




Figure 2. Azimuth Adjustment Connection Diagram


2. MOTOR SPEED ADJUSTMENT

Deck Mode Test Tape Test Point Adjustment Adjust for Remark
Normal Speed MTT-111 Speaker Out VR401 3kHz