Text preview for : HM1100C-TE.pdf part of MAKITA HM1100C-TE MAKITA HM1100C-TE.pdf
Back to : HM1100C-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. HM1100C
New Tool
Description Demolition Hammers
CONCEPTION AND MAIN APPLICATIONS 98m
m(3-
7/8"
)
Model HM1100C is the hammer classed between Model
HM0810 and Model HM1200, and it's brief benefits are;
224mm(8-7/8")
*Less vibration toward hands than competitor's same class
hammers by improved over all design
*Reduced operator' s fatigue in cotinuous operation by
ergonomically designed large handle, well balanced side
handle and slide switch
*Easy operation for light hammering by electronical speed
adjusting dial at lower blows per minute position 524mm(20-5/8")
*Adapted for SDS-max type bit Model HM1l00 is the model
without electronical) speed control feature.
Specifications
Continuous Rating (W)
Voltage (V) Current (A) Cycle (Hz) Max. Output(W)
Input Output
100 11 50/60 1050 450 1050
115 9.6 50/60 1050 450 1050
200 5.5 50/60 1050 450 1050
220 5 50/60 1050 450 1050
230 4.8 50/60 1050 450 1050
240 4.6 50/60 1050 450 1050
Bit-type SDS-max
Blows per minute HM1100C 1300-2650(bpm)
HM1100 2650(bpm)
Net Weight 6.1Kg(13.5lbs)
Cold Length 5m(16.4ft)
Standard equipment
Bit Grease Plastic Carrying Case
Optional accessories
Hammer Grease
Features and benefits
1.Double insulated
2.See the attached sheets for more information.
The standard equipment for the tools shown may differ form country to country
Chisel or Spade can be
set at 16 different angles.
Bit'angle can be changed with bit in tool holder
by pushing change ring and turning it.
On-off slide switch
360
suitable for
continuous use
Large handle
. Ergonomic shape
. Switch is removed.
. Large enough
for both hands
at stright-down work
. Roundish shape for
supporting tool by
other part of the body
without pain
D-Side handle
No hammering when idling Can be set at any angle Speed adjusting dial
Bit does not jump arround. and swiveled at 8 positions (HM1100C only)
Efficiency and endurance back and forth Light hammering is easily
Ergonomic body shape performed by setting at
are improved.
Body can be held low blows per minute.
without side handle.
Bit can be installed or removed
by sliding tool holder cover.
Steady speed + Soft start
(HM1100C only)
Easy to locate bit by
electronical speed control