toshiba_42wl58p_[ET].zip part of TOSHIBA 42wl58p [ET] toshiba_42wl58p_[ET].zip, TOSHIBA LCD Proj 42WL58P toshiba_42wl58p

Text preview for : toshiba_42wl58p_[ET].zip part of TOSHIBA 42wl58p [ET] TOSHIBA LCD Proj 42WL58P toshiba_42wl58p_[ET].zip

Back to : toshiba_42wl58p_[ET].zip | Home

SCHEMATIC DIAGRAM
MODEL : 42WL58P
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SERVICE SAFETY PRECAUTIONS" ON PAGE 3 OF
THIS MANUAL.

CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate components
which have special characteristics important for safety and should be replaced only with types identical to those in the
original circuit or specified in the parts list. The mounting position of replacements is to be identical with originals.
Before replacing any of these components, read carefully the PRODUCT SAFETY NOTICE on the MANUAL for this
model. Do not degrade the safety of the receiver through improper servicing.

NOTE:
1. RESISTOR Resistance is shown in ohm [K = 1.000, M = 1.000.000]. All resistors are 1/6W and 5% tolerance
carbon resistor, unless otherwise noted as the following marks.
1/2R = Metal or Metal oxide of 1/2 watt 1/2S = Carbon compsistion of 1/2 watt
1RF = Fuse resistor of 1 watt 10W = Cement of 10 watt
K =