Text preview for : Deskstar 34GXP & 37GP Quick Installation Guide v1.0 - English.pdf part of IBM Deskstar 34GXP & 37GP Quick Installation Guide v1.0 - English IBM Deskstar 34GXP & 37GP Quick Installation Guide v1.0 - English.pdf
Back to : Deskstar 34GXP & 37GP Qui | Home
IBM storage products
Quick installation guide
Deskstar 34GXP & 37GP
AT/IDE
Models: DPTA-353750 DPTA-353000
DPTA-352250 DPTA-351500
DPTA-373420 DPTA-372730
DPTA-372050 DPTA-371360
System requirements for Ultra ATA/66 Quick installation procedure
Y 40 pin, 80 conductor cable 1. Save the packaging materials including the ESD bag
in the event that the drive must be returned.
Y A contoller card or motherboard chipset with Ultra
2. Record the serial number and part number of your
ATA/66 or higher capability
IBM Deskstar for future reference.
Y Ultra ATA/66 compatible BIOS 3. Backup all data before proceeding with installation.
4. Turn off the computer.
If you do not have the above components, your drive 5. Open the case as directed by the computer system
will function, but at speeds lower than 66.6 MB/second. manual.
6. Discharge the static electricity from the package and
from your body. With one hand touch an unpainted
Handling precautions metal surface on your computer chassis, then touch
the ESD bag with the other hand for at least 2
Y Do not open the ESD (electro-static discharge) bag seconds.
containing the drive until required. 7. Unplug the computer.
Y Do not apply pressure on the drive during handling 8. Remove the drive from the ESD bag.
or installation. 9. Set the jumpers. Refer to the diagram below