Text preview for : Service Bulletin DZ10-012.PDF part of DENON Service Bulletin DZ10-012 DENON DVD Video Player DVD Video Player Denon - DVD-A1UDCI Service Bulletin DZ10-012.PDF
Back to : Service Bulletin DZ10-012 | Home
100 Corporate Drive Mahwah, NJ 07430
Service Bulletin
No. : DZ10-012
Date: April 21, 2010
_____________________________________________________________
Model: DVD-A1UDCI
Subject: Correction of the firmware via DPMS
Countermeasure is applicable only upon claim from the customer.
Symptom: 1) The red caution might be indicated, and the unit might not play
the BD disc "AVATAR".
2) The characters become garbled on the GUI screen with CD playback.
3) DBP-4010UDCI not Compatible with Runco DHD3 Processor.
Solution: We corrected the firmware so that no malfunction occurs.
Please do not use Proxy for updating in the Network environment! If customers
use setting of Proxy, the unit won't update the firmware properly.
Caution: It is necessary to initialize the unit before the update work begins. The
customer has to initialize their BD/DVD Player. Please update the firmware after
you confirm this matter to the customer beforehand.
Updating the firmware (Refer to the Instruction Manual.)
1) Turn the Power Supply of the unit off.
2) Connect the Ethernet terminal of the unit to the Network line by Ethernet
straight cable. (Don't use Ethernet cross cable.)
3) The connection of the network recommends the Ethernet cable for certain
update.
4) Turn the Power Supply of the unit on.
5) Remove the Disc from the Tray.
6) Please confirm! "NO DISC" on the FL Display.
7) The unit sets the Internet. It wishes waiting for about two minutes until
customer's router ends the setting.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
The update doesn't succeed when the customer's set cannot correctly hook up to
the Internet. In this case, please confirm the internet environment of the
customers house. Check to see if the customers set can receive internet radio.
There are some problems under the internet environment when the Internet radio
cannot be received.
8) Press "SETUP" button on the Remote control and indicates the GUI menu.
9) Press "CURSOR" button.
10) The GUI indicates, "Other Setup" > "Firmware Update".
Caution: The update interrupts when it is not possible to connect it with the
Internet correctly. In this case, please do from 1) again.
11) Select the "Start" on GUI.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
12) Press the "ENTER" button.
13) The firmware will start updating.
Caution: When the firmware update starts correctly, the GUI, the audio signal,
everything stops, and become the update operation.
14) When updating starts, the power indicator lights red.
15) The GUI display disappears, and becomes only FL display.
16) During update, a rough remaining time is indicated on the display. When
updating is complete the power indicator lights green and