Text preview for : 5-rh21-servtools.pdf part of NOKIA 5-rh21-servtools NOKIA Mobile Phone 3520 5-rh21-servtools.pdf
Back to : 5-rh21-servtools.pdf | Home
Nokia Customer Care
RH-21 Series Transceivers
Service Tools
Issue 2 07/2004 2004 Nokia Corporation. Page 1
Company Confidential
RH-21 Company Confidential
Service Tools Nokia Customer Care
Page 2 2004 Nokia Corporation. Issue 2 07/2004
Company Confidential RH-21
Nokia Customer Care Service Tools
Contents
Page No
Service Tools.................................................................................................................. 5
3520 .............................................................................................................................5
Flashing and Testing Setups ........................................................................................ 10
FPS-8 Flash Prommer for Heavy Flash .....................................................................10
FPS-8C Flash Prommer for Heavy Parallel Flash .....................................................10
User Instructions .......................................................................................................... 11
SF-35 ..........................................................................................................................11
DA-32 ........................................................................................................................13
Issue 2 07/2004 2004 Nokia Corporation. Page 3
RH-21 Company Confidential
Service Tools Nokia Customer Care
Page 4 2004 Nokia Corporation. Issue 2 07/2004
Company Confidential RH-21
Nokia Customer Care Service Tools
Service Tools
3520
Photo Code Service Tool Code Description
MJ-8 Module Jig 0770522 This jig allows phone
PWB-level service and
troubleshooting. Elec-
tric currents should be
protected against
over-voltage and
over-current.
FLS-4S POS Flash Adapter 0080543 The Point of Sale
(POS) flash is a low-
cost software upgrade
tool. This requires the
XCS-1 cable and
ACP-8U for operation.
FPS-8 Flash Prommer 0080321 The Flash Prommer
FPS-8 is used for
flash.
FPS-8C Heavy Flash Prommer 0080396 The Heavy Flash
Prommer FPS-8C is
used for heavy paral-
lel flashing.
Issue 2 07/2004 2004 Nokia Corporation. Page 5
RH-21 Company Confidential
Service Tools Nokia Customer Care
Photo Code Service Tool Code Description
JBV-1 Docking Station 0770298 The Docking Station
and the Docking Sta-
tion Adapter (DA-32)
are needed for Mbus,
Fbus, RF, and audio
connections.
This setup allows con-
nection between flash
prommers. When the
audio box is con-
nected, it has to be
connected to the
phone's audio con-
nector.
DA-32 Docking Station 0770870 The Docking Station
Adapter can be powered by
FPS-8 or external
power supply.
CPL-1 Coupler 0770287 The coupler has been
developed for antenna
go/no go testing.
JBA-8 Audio Box 0770320 The Audio Box is
needed for audio con-
nections. The box
must support DCT4
Janette audios. JBA-8
provides an intercon-
nection between the
phone's system con-
nector (XEAR, XMIC)
through a fixed audio
cable and audio tester
with a BNC-BNC
coax. Connection to a
PC can be made with
the service battery,
through a DAU-9
cable.
Page 6 2004 Nokia Corporation. Issue 2 07/2004
Company Confidential RH-21
Nokia Customer Care Service Tools
Photo Code Service Tool Code Description
SF-35 Flash Adapter 0770868 SF-35 allows a con-
tinuous maximum
power supply for the
phone from an exter-
nal power supply, the
ACP-8.
RJ-15 Soldering Jig 0770611 RJ-15 is used to hold
the PWB during repair
and troubleshooting.
AXP-8 Printer Cable 0730298 The Parallel Printer
Cable connects the
parallel connector of
the PC and the paral-
lel input of the FPS-8.
AXS-4 D9-D9 Cable 0730090 The AXS-4 D9-D9
service cable is used
to connect two 9-pin
connectors (e.g.,
between PC and
FPS-8). AXS-4 length
is 2 meters
ADS-3 Audio Cable 0730197 The audio cable con-
nects to the audio box
JBA-6.
ADS-4 Audio Cable 0730222 ADS-4 is the service
cable between the
phone and the service
audio box.
Issue 2 07/2004 2004 Nokia Corporation. Page 7
RH-21 Company Confidential
Service Tools Nokia Customer Care
Photo Code Service Tool Code Description
CA-5S DC Cable 0730283 The DC Cable CA-5S is
used to connect the
docking station to the
charger connection
(Vin) of the phone to
conduct the charger
calibration service
procedure.
DAU-9S Mbus Cable 0730108 The Mbus Cable has a
modular connector
and is used with the
service audio box
JBA-4 or a modular
T-adapter.
PCS-1 Power Cable 0730012 The Power Cable
PCS-1 is used to con-
nect the service tools
(JBV-1, DA-32) to an
external power supply.
XRS-6 RF Cable 0730231 The XRS-6 cable con-
nects a service tool
and RF measurement
equipment.
XCS-4 Mbus/Fbus Cable 0730178 The XCS-4 Service
Cable is a modular
cable for flashing
DCT4 products.
Page 8 2004 Nokia Corporation. Issue 2 07/2004
Company Confidential RH-21
Nokia Customer Care Service Tools
Photo Code Service Tool Code Description
PKD-1 SW Security Device 0750018 SW security device
PKD-1 is hardware
device that, when
connected to the par-
allel (LPT) port of the
PC, enables the use of
the service software.
Without the dongle
present, it is not pos-
sible to use the serv-
ice software. Printers
or other peripheral
devices can be con-
nected to the PC
through the dongle, if
needed.
Caution: Make sure
that you have
switched off the PC
and the printer before
making connections!
Caution: Do not con-
nect the PKD-1 to the
serial port. You may
damage your PKD-1!
SA-12 RF Probe Support 0770623 The RF Cable is used
XRS-11 RF Probe 0630265 for connection to the
RF output of the PWB.
The XRS-11 Cable is
used together with
the SA-12 to ensure a
good connection.
GAC-8/ Adapter 0080834 The GAC-8/GAC-9K
GAC-9K adapter is needed for
proper RF connection
when using the DA-
32. The adapter allows
galvanic connections
to assembled handset
RF switches. The
adapter permits the
handset to be con-
nected to RF measur-
ing and test
equipment during test
and repair and can be
used with covers on or
off.
NOTE: GAC-8 must be
used with GAC-9k.
Issue 2 07/2004 2004 Nokia Corporation. Page 9
RH-21 Company Confidential
Service Tools Nokia Customer Care
Flashing and Testing Setups
FPS-8 Flash Prommer for Heavy Flash
The FPS-8 flash prommer is used for heavy flashing. The sales pack product code is
0080321.
FPS-8C Flash Prommer for Heavy Parallel Flash
The FPS-8C flash prommer is used for heavy parallel flashing. The sales pack product
code is 0080396.
Page 10 2004 Nokia Corporation. Issue 2 07/2004
Company Confidential RH-21
Nokia Customer Care Service Tools
User Instructions
SF-35
Follow these instructions to avoid damage to the adapter or the phone.
Note: Using the adapter in any way other than described here may harm the important pins and con-
nectors of the adapter.
1 Place the adapter in your left hand and the phone in your right hand.
2 Align the battery connecter with the battery contacts of the adapter. Gently
press the phone onto the adapter (see following picture).
Issue 2 07/2004 2004 Nokia Corporation. Page 11
RH-21 Company Confidential
Service Tools Nokia Customer Care
3 Press the upper end of the handset down onto the adapter until the locking
mechanism engages.
To remove adapter, dis-engage the locking mechanism by pulling back on the lever. Fol-
low the reverse order as described in steps 1 through 3.
Page 12 2004 Nokia Corporation. Issue 2 07/2004
Company Confidential RH-21
Nokia Customer Care Service Tools
DA-32
Follow these instructions to avoid causing any damage to the adapter or the phone.
Note: Using the adapter in any other way may harm the important pins and connectors of the adapter.
1 Place the adapter in your left hand and the phone in your right hand.
2 Let the other edge of the phone down in place.
Issue 2 07/2004 2004 Nokia Corporation. Page 13
RH-21 Company Confidential
Service Tools Nokia Customer Care
3 Press down the upper end of the phone with your finger until the locking mecha-
nism engages.
4 To remove the phone from the adapter, dis-engage the locking mechanism by
pulling back on the lever. Follow the reverse order as described in steps 1
through 3.
Page 14 2004 Nokia Corporation. Issue 2 07/2004