Text preview for : 05_Adjustment.pdf part of Samsung 05 Adjustment Samsung LCD TV LW15M13C 05_Adjustment.pdf



Back to : 05_Adjustment.pdf | Home

4 Alignments and Adjustments
4-1 General Alignment Instuction
1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation.
Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV.
When inserting signal markers, do not allow the marker generator to distort test result.
5. Connect the TV only to an DC power source with voltage and frequency as specified on
the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on.
Make sure that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transform.




LW15M13C/LW17M11C 4-1
4 Alignments and Adjustments


4-2 Factory Mode Adjustments
4-2-1 Entering Factory Mode
1. To enter "Service Mode" Press the remote -control keys in this sequence :
- If you do not have Factory remote - control




- If you have Factory remote - control




4-2-2 Factory Mode Tree

128 80
Service-TV 128 80
Vi d e o A d j u s t
126 80
Check Sum : 0000
255 FF
255 FF
2F
255 FF
Current Control_fix
T- M U S P E U - 2 0 0 2 40 28
2003-09-21 PM 04:00 42 2A
63 3F
0 00
Vi d e o R e c a l l
Tint




4-2 LW15M13C/LW17M11C
4 Alignments and Adjustments




LW15M13C/LW17M11C 4-3
4 Alignments and Adjustments


Memo




4-4 LW15M13C/LW17M11C