Text preview for : Hitachi Deskstar 120GXP Quick Installation Guide v1.1.pdf part of Hitachi Deskstar 120GXP Quick Installation Guide v1.1 Hitachi disk Hitachi Deskstar 120GXP Quick Installation Guide v1.1.pdf
Back to : Hitachi Deskstar 120GXP Q | Home
Quick installation guide
Hitachi Deskstar 120GXP
Ultra ATA/100 Hard disk drive
Models: IC35L020AVVN07
IC35L020AVVA07
IC35L040AVVN07
IC35L040AVVA07
IC35L060AVVA07
IC35L080AVVA07
IC35L100AVVA07
IC35L120AVVA07
System requirements for Ultra ATA/100 Quick installation procedure
If you do not have the components listed below, your Note: Back up all data before installing drive!
drive will function but at speeds lower than 100 MB/s.
1. Turn off the computer.
40-pin, 80-conductor cable 2. Remove the computer cover as instructed by the
computer system manual.
A controller card or motherboard chipset with Ultra
3. Discharge static electricity (see Handling pre-
ATA/100 capability
cautions).
Ultra ATA/100 compatible BIOS or driver 4. Unplug the computer.
5. Note the mounting position of existing drives and
cables. If you are replacing a drive or any cable,
Handling precautions remove it now.
6. Remove the drive from the ESD bag.
Set the drive down gently to prevent damage from 7. Record the model, the part number, and the serial
impact or vibration. number of the drive for future reference.
Do not open the ESD bag containing the drive until 8. Insert the required jumpers. Refer to the jumper
needed. block diagram below.
Handle the drive carefully by the edges. Do not