Text preview for : 60144-WW-1.pdf part of MAKITA 60144-WW-1 MAKITA 60144-WW-1.pdf
Back to : 60144-WW-1.pdf | Home
TECHNICAL INFORMATION
Subject Addition of Thin Washer 3.8
60144
For Models 6203D, 6213D, 6233D, 6313D, 6333D
Country All countries
Description As illustrated in Fig.1, Thin Washer 3.8 has been added so that Compression Spring 4 may not
fall into Gear Case A.
As illustrated in Fig.2, the slit of Gear Case A (Fig.1)
has been enlarged in order not to damage
the switch lever since Aug., 1999.
(Refer to Technical Information No.58162.)
Compression Spring 4
Due to this modification, the current Gear Case A
has come to require Thin Washer 3.8 Thin Washer 3.8
in order to protect Compression Spring 4 from (253354-6)
accidentally falling through the slit into Gear Case A.
And so, be sure to use Thin Washer 3.8 for Slit of Gear Case A
the machine that includes the current Gear Case A.
Note: Addition of Thin Washer 3.8 is a temporary
step until the slit is modified again around
Feb.,2000.
(Fig.2) Gear Case A (Part No.416055-9)
Old Current
switch lever slit
9.0mm 2.5mm 10.5mm 5.5mm
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
028 Thin Washer 3.8 1
253354-6
Implementation
Machines manufactured in U.S.A.
All models : From Nov.,1999
(To be informed later of serial No.)