Text preview for : 6019D-TE.pdf part of MAKITA 6019D-TE MAKITA 6019D-TE.pdf
Back to : 6019D-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 6019D,6019DW
New Tool
Description 10 mm Cordless Driver Drill
CONCEPTION AND MAIN APPLICATIONS
Model 6019D which has clutch for setting fastenig torque 251mm(9-7/8")
in addition to Model 6018D is redesigned version of
existing Model 6075D.
Its breief benefits are;
215mm(8-1/2")
*Easy operation
by ergonomic design for easily pushing the axis of
*Very quiet
*Setting of fastening torque : 10 stages + drill-mode
*Equipped with an electric brake
56mm(2-3/16")
Speed Drill Fast
Model Battery charger
control chuck
6019D 2 speeds N/A N/A
+
variable Keyless Battery DC9700
6019DW
speed 7000 or DC7l00
Specifications
Motor DC 7.2V magnet motor
Battery Battery 7000 (Ni-Cd,7.2V,l.3Ah)
No load speed H:0-600rpm L:0-200rpm
Chuck capacity 1. 0-l0 mm (l/32-3/8")
Capacities Steel 10 mm (3/8")
Wood 15.4mm (5/8")
Wood screw 5. l mm (13/64") X 35 mm (l-3/8")
Machine screw M6
Max. fastening H Approx. 40Kgf.cm(35in. lbs)
torque L Approx. l20Kgf.cm(l04in.lbs)
Net weight 1.1Kg(2.4lbs)
(including battery)
L : Low speed H : High speed
Standard equipment
60l9D 60l9DW
+- Bit 2-45 (2 pcs.) Yes
Battery Cover No Yes
Plastic Carrying Case No Yes
Optional accessories
Drill Bit 1.5,2,3,4,5,6 Drill Bit for wood 9,12,15
Philips Bit l-65,2-45,2-65,2-82,2-ll0,2-150,2-250,3-45,3-65,3-ll0
Slotted Bit 5-45,5-82,6-70,6. 35-45,8-45,8-70
Socket Bit 5.5-55,7-55,8-55
Foam Polishing Pad 125 Rubber Pad Assembly Wool Bonnet 100
Fast Charger DC7l00,DC9700,DC1201,DC1209 Automotive charger DC7112
Features and benefits
See the attached sheets for more information.
The standard equipment for the tools shown may differ form country to country
2 speeds by gear change (slide-button)
Keyless chuck
Ergonomic design
for easilly pushing axis of drilling
Setting of fastening torque
10 stages + drill-mode
Bit holder
Bits can be held
at both right and left sides.
Very quiet
6019D : 67dB (total noise of forty 6019's=noise of one 607 5D)
6075D : 83dB
Fastening torque by setting TorqueAdjusting Ring
Capacity
1. Reference values of the adjusting position for the fastening torque switch ring and the fastening torque
(Clutch operation torque)
(104.2)
Low speed
120
(86.8)
100
Fastening torque (69.5)
80
(52.1)
60
(34.7)
40 Hight speed
(in-lbs)
(17.4)
20
[kgf-cm]
0
(1) (2) (3) (4) (5) Drill-mode
Position of Torque Adjusting Ring
2. Work volume per charging
Same as the one for the 6172D.
Repair
(1) Cautions in disassembling --- same as 6018D.
Place the leaf spring
(2) Cautions in assembling in the dent portion.
1.Assembling of motor and gear assembly --- same as 6018D. Leaf spring
2.Assembling of leaf spring Housing L
Grease in the groove of housing L as shown
on the right figure to prevent the leaf spring Greasing
from being dropped in
Figure 1
assembling.
Assemble the leaf spring on the housing L as shown
Spring holder Change ring
on the figure 1. Gear case B
3.Assembling of change ring
Turning direction
1) Fasten in a way that the edge of spring holder is
of spring holder
placed by 1 mm or more at inner side apart from
the edge of gear case B.
2) Assemble so that the change ring can be positioned
1 mm or more
in a straight line.
Edge of Gear case B
4.Assembling of speed change lever--- same as 6018D
Edge of spring holder
5.Assembling on the housing --- same as 6018D.
6.Assembling of drill chuck --- same as 6018D.(Set the change ring to the drill mode.)
Circuit drawing
Red mark
Red
T+
Terminal Switch
T- DC motor
Black