Text preview for : pioneer_plasma_repair_notes.pdf part of Pioneer pioneer plasma repair notes Pioneer Plasma TV pioneer_plasma_repair_notes.pdf
Back to : pioneer_plasma_repair_not | Home
SERVICE INFORMATION ( 1 / 1 )
No. : SI-A48078
Date: Apr.18,1994
MODEL NO. * SER. NO. MODEL NO. * SER. NO. MODEL NO. * SER. NO.
SD-P5107/SUW/G A NK5600681-
# DETAIL OF CHANGE(S) REASON FOR CHANGES
1 Change of a Power Transformer in Power 1 To prevent flicker of picture
Supply Assy
SERVICE MANUAL
POWER SUPPLY Assy
MODEL:SD-P5107
S/M NO.:ARP2815
PAGE : 7
MODEL:
S/M NO.:
T101
PAGE:
!
MODEL:
S/M NO.:
PAGE:
MODEL:
S/M NO.:
PAGE:
Ref. CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 T101 ATT1194 2 ATT1246 T101
PIONEER ELECTRONIC CORPORATION (SPC48-591,AA-A3680 SPC-HK 104)
Issued by:
Y.IMAMIZU, MANAGER
HE Engineering Section
Service Dep.
`
SERVICE INFORMATION
Date: Oct.13,2000 No.: SI-D01008 ( 1/2 )
MODEL No. * SER.No. S/M No. PG
See to following page
# CHANGE
DETAIL 1 When change the CRT DRIVE IC iIC5101,IC5151,IC5201 j
from TDA6120Q to TDA6120QN2 in Amplifire Assy iAWV1797 j,
add diodes between 2pin and 6pin of each TDA6120QN2,
and spread the silicone bond(GYA1011) there.
REASON 1 Production convenience
Please refer to p.110 Difference of the CRT DRIVE IC
IC5101 in R CRT DRIVE Assy TDA6120Q TDA6120QN2
IC5151 in G CRT DRIVE Assy
TDA6120Q TDA6120Q
Please refer to p.111 * * * * * * * * * * * *
IC5201 in B CRT DRIVE Assy
* * * * * * * 1 * * * * * * * * 2 *
PATTERN SIDE MTZJ5.6A MTZJ3.9B
Silicone bond
(GYA1011)
TDA6120QN2
6pin 2pin
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 IC5101 TDA6120Q 2 TDA6120QN2 IC5101
A 1 added - MTZJ5.6A D5107
A 1 added - MTZJ3.9B D5108
A 1 IC5151 TDA6120Q 2 TDA6120QN2 IC5151
A 1 added - MTZJ5.6A D5157
A 1 added - MTZJ3.9B D5158
A 1 IC5201 TDA6120Q 2 TDA6120QN2 IC5201
A 1 added - MTZJ5.6A D5207
A 1 added - MTZJ3.9B D5208
PIONEER CORPORATION
NOTE:PARTS CODE Memo: MTV01014 KT,9
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. AA-D2120
HE 2:Not Interchangeable an all. AA-D2212
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
( 2/2 )
MODEL No. * SER.No. S/M No. PG
PRO-510HD/KUXC/CA A R/C ARP3047 110
PRO-610HD/KUXC/CA A R/C ARP3047 110
PRO-710HD/KUXC/CA A R/C
SD-532HD5/KBXC A R/C ARP3047 110
SD-532HD5/KUXC/CA A R/C ARP3047 110
SD-582HD5/KUXC/CA A R/C ARP3047 110
`
SERVICE INFORMATION
Date: Aug.17,2000 No.: SI-D01007-G ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-502MX/LUCBW A 3206 ARP3044
PDP-502MXE/YVLDK A 3226 ARP3044
PDP-505HD/KUC A 1051 ARP3044
# DETAIL
SYMPTOM 1 Power down (D407 lights on)
CAUSE 1 Short of valuable resistor (VR401) and wiring pattern.
SERVICE 1 Position of VR301 and VR401 is changed (refer to the figure below).
REMEDY
FACTORY 1 Addition of crystal damper between base and VR301, VR401 in POWER ASSY(AWV
COUNTER 1775).
-MEASURE
POWER ASSY(AWV1775) PART SIDE Side view of valuable resistor
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
PIONEER ELECTRONIC CORPORATION
NOTE:PARTS CODE Memo: PJ/NO. 01-D01
T.NAKAGAWA ,MANAGER 1:Changeable from old to new. MTV01-004
DP 2:Not Interchangeable an all. AA-D1974
Technical Support group 3:Interchangeable in both ways Classify:
Service Support Div. 5:Do not use old parts
SERVICE INFORMATION
Date: June. 1, 2000 No.: SI-D01006 ( 1/2 )
MODEL No. * SER.No. S/M No. PG
PDP-502MX/LUCBW A R/C ARP3044
PDP-502MXE/YVLDK A R/C ARP3044
PDP-505HD/KUC A R/C ARP3044
PDP-502MX/LUCBW B 04286- ARP3044
PDP-502MXE/YVLDK B 04626- ARP3044
PDP-505HD/KUC C 01635- ARP3044
# CHANGE
DETAIL 1 Change and addition of resistors in Digital video ass'y
2 Change of Digital video ass'y
REASON 1,2 Procurement convenience
As to circuit change, please see page 2/2.
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 R3207 RD1/4PU222J 2 RS1/16S222J R3207
A 1 Added - RS1/16S0R0J R3481,3482,3483,3500
A 1 Added - RS1/16S0R0J R3487
B 2 Digital video ass'y AWV1815 2 AWV1838 Digital video ass'y
C 2 Digital video ass'y AWV1791 2 AWV1839 Digital video ass'y
PIONEER CORPORATION
NOTE:PARTS CODE Memo: EM, 73
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. SPC55-008
HE 2:Not Interchangeable an all. AA-D1980
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
Digital video ass'y ( 2/2 )
R3207
R3483
R3487 R3482
R3481
R3500
SERVICE INFORMATION
Date: June. 1, 2000 No.: SI-D01005 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-502MX/LUCBW A 03657- ARP3044
PDP-502MXE/YVLDK A 03601- ARP3044
PDP-505HD/KUC A 01251- ARP3044
PDP-502MX/LUCBW B R/C ARP3044
PDP-502MXE/YVLDK B R/C ARP3044
PDP-505HD/KUC B R/C ARP3044
# CHANGE
DETAIL 1 Change of FFC between Analog video ass'y and Digital video ass'y
2 Change of resistors in Digital video ass'y
REASON 1 To improve the reliability of CLK, H.D,V.D signal between Analog video ass'y and
Digital video ass'y
2 Circuit change of Digital video ass'y
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 FFC ADE1180 2 ADE1181 FFC
B 2 R3405,3407,3408 RS1/16S100J - Deleted
B 2 Added - RS1/16S100J R3475,3476,3477
PIONEER CORPORATION
NOTE:PARTS CODE Memo: EM, 73
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. SPC54-391
HE 2:Not Interchangeable an all. AA-D1797
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
`
SERVICE INFORMATION
Date: May.18,2000 No.: SI-D01004 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
See to following page
# CHANGE
DETAIL 1 Addition of a resistor(R7429) and a transistor(Q7112)
2 Addition of a transistor(Q7326)
3 Change of a resistor(R7429 --> R7153 ---> R7429)
4 Deletion of a transistor(Q7112)
REASON 1 To prevent the noise in 3-picture search mode.
234 To prevent the noise in 3-picture search mode. (Production convenience)
As for Circuit diagram, please see page 3/3.
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 Added - RD1/4PU102J R7429
A 1 Added - 2SC2712 Q7112
A 2 Added - 2SC2712 Q7326
A 3 R7429 RD1/4PU102J 2 RS1/16S102J R7153
A 3 R7153 RS1/16S102J 2 RS1/16S102J R7429
A 4 Q7112 2SC2712 - Deleted
PIONEER CORPORATION
NOTE:PARTS CODE Memo: EM, 9
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. SPC54-463 AA-D
HE 2:Not Interchangeable an all. SPC54-464 1930
Service Engineering Section 3:Interchangeable in both ways Classify: AA-D
Service Division 5:Do not use old parts 1938
( 2/3 )
MODEL No. * SER.No. S/M No. PG
PRO-510HD/KUXC/CA A R/C ARP3047 45
PRO-610HD/KUXC/CA A R/C ARP3047 45
PRO-710HD/KUXC/CA A R/C
SD-532HD5/KBXC A R/C ARP3047 45
SD-532HD5/KUXC/CA A R/C ARP3047 45
SD-582HD5/KUXC/CA A R/C ARP3047 45
S/M P45 ( 3/3 )
SIGNAL ASSY Q7112
R7153
S/M P47
SIGNAL ASSY
Q7326
R7429
SERVICE INFORMATION
Date: May.18,2000 No.: SI-D01003 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PRO-510HD/KUXC/CA A R/C ARP3047 78
PRO-610HD/KUXC/CA A R/C ARP3047 78
PRO-710HD/KUXC/CA A R/C
# CHANGE
DETAIL 1 Change of a resistor and addition of a capacitor in SUB VIDEO SERVICE ASSY
REASON 1 To prevent the horizontal noise in single screen mode.
R3270
(0 ohm --> 470 ohm)
C3277
(2200pF Added)
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 R3270 RS1/16S0R0J 2 RS1/16S471J R3270
A 1 Added - CKSRYB222K50 C3277
PIONEER CORPORATION
NOTE:PARTS CODE Memo: EM, 9
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. SPC55-005
HE 2:Not Interchangeable an all. AA-D1962
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
SERVICE INFORMATION
Date: May.15,2000 No.: SI-D01002 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PRO-510HD/KUXC/CA A R/C ARP3047 106
PRO-610HD/KUXC/CA A R/C ARP3047 106
PRO-710HD/KUXC/CA A R/C
SD-532HD5/KBXC A R/C ARP3047 106
SD-532HD5/KUXC/CA A R/C ARP3047 106
SD-582HD5/KUXC/CA A R/C ARP3047 106
# CHANGE
DETAIL 1 Change of VR602 in DEFLECTION SERVICE ASSY
REASON 1 To improve the reliability of High voltage adjustment
S/M Location:
DEFLECTION SERVICE ASSY
P106 C-4
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 VR602 VRTHS6VS223 2 VRTHS6VS473 VR602
PIONEER CORPORATION
NOTE:PARTS CODE Memo: EM, 70
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. SPC55-004
HE 2:Not Interchangeable an all. AA-D2008
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
SERVICE INFORMATION
Date: Apr. 19, 2000 No.: SI-D01001
MODEL No. * SER.No. S/M No. PG
PRO-510HD/KUXC/CA A R/C RRV3047 94
PRO-610HD/KUXC/CA A R/C RRV3047 94
PRO-710HD/KUXC/CA A R/C
SD-532HD5/KBXC A R/C RRV3047 94
SD-532HD5/KUXC/CA A R/C RRV3047 94
SD-582HD5/KUXC/CA A R/C RRV3047 94
# CHANGE
DETAIL 1 Change of convergence micro-com in DIGITAL CONV. ASSY
2 Addition of resistor to DIGITAL CONV. ASSY
REASON 1 Production convenience
2 To improve convergence OSD display
DIGITAL CONV. ASSY
IC1652 Location: S/M P94 C-2,3
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 IC1652 PD5564B9 2 PD5564C9 IC1652
A 2 Added - RD1/4PU472J R1737
PIONEER CORPORATION
NOTE:PARTS CODE Memo: SPC54-431
,MANAGER 1;Changeable from old to new. AA-D1894
2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
( 1 / 2 )
CORRECTION OF SERVICE MANUAL
No.: SI-A49001
Date:May 30,1994
Please correct your service manua
MODEL PAGE INCORRECT CORRECT
[S/M NO.]
The following part is available as spare parts.
No. Part No. Description
SD-P404-K 13 24 ADE1091 RF cable
-P4043-K
[ARP2080]
SD-P504-K 14
25
-P504-Q
[ARP2082]
SD-P455-K 10
-P4552-K 21
-P4553-K
-P4553-W
[ARP2284]
SD-P505-K 10
-P505-Q 22
-P5053-K
-P5053-Q
[ARP2285]
SD-P4053-K 13
[ARP2273]
21
SD-P5005 10
[ARP2292]
25
SD-P5553-K 13
-P5553-Q
[ARP2353] 94
SD-P5065-K 13
-P5065-Q
-P4565-K
233
-P4565-Q
etc.
[ARP2565]
PIONEER ELECTRONIC CORPORATION (QP48-032,QP48-041 SMM-AN 106)
Issued by:
Y. IMAMIZU, MANAGER
HE Engineering Section
Service Dept.
( 2 / 2 )
MODEL PAGE INCORRECT CORRECT
[S/M NO.]
The following part is available as spare parts.
No. Part No. Description
A-09 5 55 AKE-046 Earth terminal
[ARP2858]
SERVICE INFORMATION (1/1)
No. :SI-A48088-G
Date:APRIL 13,1994
MODEL NO. * SER. NO. MODEL NO. * SER. NO. MODEL NO. * SER. NO.
MA-99/SD A 006601~
MA-99/SL A 000701~
# DETAIL OF CHANGE(S) REASON FOR CHANGES
1 MODIFICATION OF GND PATTERN IN MAIN BOARD X TO REDUCE HUM NOISE IN SIGNAL LINE
ASSY COMING FROM POWER SUPPLY LINE
SERVICE MANUAL
RESIDUAL NOISE LEVEL IS HIGH IN SIGNAL LINE.
MODEL :MA-99
SINCE THE CAPACITOR(C98) OF POWER SUPPLY LINE IS GROUNDED S/M NO.:TRT1055
TO THE GND OF SIGNAL LINE, HUM NOISE IS CREATED IN SIGNAL
LINE DUE TO THE RIPPLE FROM POWER SUPPLY LINE. PAGE :7
CUT THE PATTERN
ADD A LEAD WIRE
MAIN BOARD ASSY(MWX3029)
CUT THE GND PATTERN OF C98 - LEAD AS ABOVE.
ADD A LEAD WIRE TO CONNECT C98 - LEAD WITH J33(GND) AS ABOVE.
SAME AS COUNTERACTION IN FACTORY
Ref. CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
PIONEER ELECTRONIC CORPORATION FA3Y017 TS 120
Issued by:
Y.IMAMIZU, MANAGER
HE Engineering Section
Service Dep.
SERVICE INFORMATION
Date: Jan. 17, 2001 No.: SI-D01029 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-502MX/LUCBW/1 A 001281- ARP3075
PDP-502MXE/YVLDK/1 A 000741- ARP3075
PDP-505HD/KUC/1 A 000141- ARP3080
# CHANGE
DETAIL 1 Add the ferrite core (L0006,L0007)
REASON 1 To improve the picture noise
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 Added - ATX1041 L0006,L0007
PIONEER CORPORATION
NOTE:PARTS CODE Memo: AA-D2424 KT, 9
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. SPC55-188
HE 2:Not Interchangeable an all. MTV01-083
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
SERVICE INFORMATION
Date: Jan. 17, 2001 No.: SI-D01028 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-505HD/KUC A R/C
# CHANGE
DETAIL 1 Change the parts in DIGITAL Assy.
REASON 1 To prevent the character from changing.
Please refer to ARP3044
IC2257; page 13
C2281-C2284; page 14
C2259-C2262; page 3
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 IC2257 TC74VHCT541A 2 TC74VHC541FT IC2257
FT
A 1 C2281,C2282, CCSQCH221J50 2 CKSQYB222K50 C2281,C2282,
C2283,C2284 C2283,C2284
A 1 C2259,C2260, CCSRCH220J50 CKSQYB152K50 C2259,C2260,
C2261,C2262, C2261,C2262,
PIONEER CORPORATION
NOTE:PARTS CODE Memo: AA-D2531 KT, 9
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. SPC55-332
HE 2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
SERVICE INFORMATION
Date: Jan. 17, 2001 No.: SI-D01027 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDU-50WX1/TUCYV A R/C ARP3072 6,7
# CHANGE
DETAIL 1 Change and add the parts.
REASON 1 To change the thickness of PROTECT PANEL Assy.
(To improve the performance.)
Protect Panel Assy (AMR3162) Front View
Holder Gasket (ANK1677) Front
Protect Panel Assy (AMR3162) Side View
Front
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 Protect Panel Assy AMR3162 2 AMR3230 Protect Panel Assy
A 1 Added - ANK1677 Holder Gasket
PIONEER CORPORATION
NOTE:PARTS CODE Memo: AA-D2502 KT, 70
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new. SPC55-313
HE 2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
SERVICE INFORMATION
Date: Mar. 13,2001 No.: SI-D01026 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-V400/LU/CA A Running Change ARP2954 80
PDP-V401/LU/CA A Running Change ARP2981 80
PDP-V402/LUBW/CA A Running Change ARP3034 100
PDP-V402/LUBW/CA/1 A Running Change ARP3081 78
PDP-V402/LUCBW A Running Change ARP3034 100
# CHANGE
DETAIL 1 Change of resistors in MAIN POWER ASSY
REASON 1 To improve performance
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 R3107 RD1/2PM473J - RS1LMF153J R3107
A 1 R3108 RD1/2PM563J - RS1LMF153J R3108
PIONEER CORPORATION
NOTE:PARTS CODE Memo: SPC55-299
M.EGASHIRA ,MANAGER 1;Changeable from old to new. AA-D2507
BS 2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify: NM-70
Service Division 5:Do not use old parts
SERVICE INFORMATION
Date: Mar.19,2001 No.: SI-D01025 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-V402EA/YVLDK A Running Change ARP3076 13
22
# CHANGE
DETAIL 1 Addition of Ferrite Core
2 Change from Wire Saddle to Ferrite Core Holder
REASON 1,2 To improve the performance
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 Added - ATX1037 L4
A 2 Wire Saddle AEC1745 1 AEC1818 Ferrite Core Holder
PIONEER CORPORATION
NOTE:PARTS CODE Memo: SPC55-271
M.EGASHIRA ,MANAGER 1;Changeable from old to new. AA-D2501
BS 2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify: NM-70
Service Division 5:Do not use old parts
`
SERVICE INFORMATION
Date: Apr.6, 2001 No.: SI-D01024A- ( 1/2 )
G
MODEL No. * SER.No. S/M No. PG
PDP-V402/LUBW/CA/1 ALL
# DETAIL
SYMPTOM PDP repeats on and off in the state that a rear fan is not connected.
CAUSE In Main Power Assy (ARW1077), noises enter into the Power ON/OFF signal coming
from Microcomputer, and it causes malfunction.
SERVICE Remove the cathodic side of D3802, and add another diode (HSS104-02) to D3802 in
series
REMEDY in Main Power Assy (AWR1077).
*Please refer to Figure 1.
FACTORY Same as Service Remedy
COUNTER
-MEASURE
D3802 HSS104-02
(New added diode)
Please discard the previous Service Information,
SI-D01024-G, dated on Mar. 9, 2001
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
PIONEER SERVICE NETWORK CORPORATION
NOTE:PARTS CODE Memo: MTV01- 075
M.EGASHIRA ,MANAGER 1:Changeable from old to new.
2:Not Interchangeable an all.
BS Service Administration Group 3:Interchangeable in both ways Classify: NM-7
BS Service Division 5:Do not use old parts
( 2/2 )
`
SERVICE INFORMATION
Date: Jan 26, 2001 No.: SI-D01023-G ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-V402EA/YVLDK A 1541-
# DETAIL
SYMPTOM 1 Only when the incoming signal is PAL, Synchronism sometimes; two or three times
during 30 minutes, falls into disorder in a moment.
CAUSE 1 Noise is easy to obstruct the wave at the beginning due to the heavy load on the
communication line in u-com.
SERVICE Please change R7174 and R7175, from 8.2kohm to 2.7kohm.
REMEDY
FACTORY Same as the service remedy
COUNTER
-MEASURE
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 R7174, R7175 RS1/16S822J RS1/16S272J R7174, R7175
PIONEER SERVICE NETWORK CORPORATION
NOTE:PARTS CODE Memo: MTV01-080
M.EGASHIRA ,MANAGER 1:Changeable from old to new. SPC55-333
2:Not Interchangeable an all. AA-D3013
BS Service Administration Group 3:Interchangeable in both ways Classify: NM-6
BS Service Division 5:Do not use old parts
`
SERVICE INFORMATION
Date: Aug.7,2001 No.: SI-D01023A- ( 1/1 )
G
MODEL No. * SER.No. S/M No. PG
PDP-V402EA/YVLDK A 1541-
# DETAIL
SYMPTOM 1 Only when the incoming signal is PAL, Synchronism sometimes; two or three times
during 30 minutes, falls into disorder in a moment.
CAUSE 1 Noise is easy to obstruct the wave at the beginning due to the heavy load on the
communication line in u-com.
SERVICE Please change R7174 and R7175, from 8.2kohm to 2.7kohm.
REMEDY
FACTORY Same as the service remedy
COUNTER
-MEASURE
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 R7174, R7175 RS1/16S822J - RS1/16S272J R7174, R7175
PIONEER SERVICE NETWORK CORPORATION
NOTE:PARTS CODE Memo: MTV01-080
M.EGASHIRA ,MANAGER 1:Changeable from old to new. SPC55-333
2:Not Interchangeable an all. AA-D3013
BS Service Administration Group 3:Interchangeable in both ways Classify: NM-6
BS Service Division 5:Do not use old parts
CORRECTION OF SERVICE MANUAL
Date: Jun. 7, 2001 No.: SI-D01022 ( 1/1 )
MODEL No. S/M No. PG MODEL No. S/M No. PG
PDP-502MX/LUCBW ARP3037 42 PDP-502MXE/YVLDK ARP3037 42
Please correct your service manual
6. ADJUSTMENT
SERVICE FACTORY MODE
(AXD1445)
PIONEER CORPORATION
Memo: AN 70
K.NOHARA ,MANAGER
HE
Service Engineering Section
Service Division
`
SERVICE INFORMATION
Date: Dec.19 ,2000 No.: SI-D01021-G ( 1/3 )
MODEL No. * SER.No. S/M No. PG
PRO-700HD/KUXC/CA A --- ARP3013
SD-641HD5/KUXC/CA B --- ARP3031
64LHP5000 (for SHARP) C ---
64LHP4000 (for SHARP) D ---
# DETAIL
SYMPTOM 1 Screen distorts due to out of synchronization when changing input video from NTSC
images ( 15.7kHz ) to progressive images ( 31.5kHz ).
CAUSE 1 Input signal frequency cannot be discriminated on PTV.
SERVICE 1 Please refer to page 2 and 3.
REMEDY
FACTORY Service remedy only
COUNTER There will be no more production for this model.
-MEASURE
Please refer to the following pages.
Note:
When picture is disturbed, select the other function and reselect the function that is connecting
to DVD and then it operates normally.
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 Tuner u-com Assy AWV1715 AWV1881 Tuner u-com Assy
A 1 Tuner u-com Assy AWV1744 AWV1881 Tuner u-com Assy
B 1 Tuner u-com Assy AWV1762 AWV1884 Tuner u-com Assy
C 1 Tuner u-com Assy AWV1723 AWV1882 Tuner u-com Assy
1 Tuner u-com Assy AWV1755 AWV1883 Tuner u-com Assy
AC 1 IC2202 PD5463C, C9 PD5463D9 IC2202
AD 1 IC2202 PD5463B PD5463D9 IC2202
B 1 IC2202 PD5542A PD5542B9 IC2202
A 1 Sub video Assy AWV1718 AWV1745 Sub video Assy
C 1 Sub video Assy AWV1726 AWV1745 Sub video Assy
PIONEER CORPORATION
NOTE:PARTS CODE Memo: AN 69
Y.YAMAMOTO ,MANAGER 1:Changeable from old to new.
HE 2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
( 2/3 )
For Tuner u-com Assy:
Replace IC2202 with new one in accordance with the following list, and delete C2202. Location of
this IC and capacitor is as illustrated below. (There are 2 kinds of new IC.)
Old and New one for Tuner u-com assy,
OLD NEW
ASSY sub u-com IC ASSY sub u-com IC
PRO-700HD AWV1715 PD5463C(9) AWV1881 PD5463D9
AWV1744 PD5463B AWV1881 PD5463D9
SD-641HD5 AWV1762 PD5542A AWV1884 PD5542B9
64LHP5000 AWV1723 PD5463C AWV1882 PD5463D9
64LHP4000 AWV1755 PD5463B AWV1883 PD5463D9
Notes:
In case new Assy is available, it is possible for you to replace old Assy with new Assy. New Assy is
basically the same as old Assy except for the IC replaced and capacitor deleted.
IC2201
IC2202
PD5463 or
PD5542
C2202
IC2203
Tuner u-com Assy ( parts mount side )
( 3/3 )
For Sub Video Assy:
* Remove the shield case
For PRO-700HD (Serial 1 - 1541) and 64LHP5000 (Serial 1 - 280), cut 2 pattern lines and add a
jumper line as illustrated below:
For others models or other serial number product, modification is not necessary on this sub-video
Assy.
Serial No. OLD MEASURE NEW
PRO-700HD 1-1541 AWV1718 necessary AWV1745
1542- AWV1745 non
SD-641HD5 ALL AWV1745 non
64LHP5000 1-280 AWV1726-A necessary
281- AWV1726-B non
64LHP4000 ALL AWV1745 non
Notes:
In case new Assy is available, it is possible for you to replace old Assy with new Assy. New Assy
is basically the same as old Assy except for the above patterns and jumper cable. As to jumper
cable, please use normal type and put it on the board as illustrated.
*1 *2
ADD jumper cable
Sub video Assy
( parts mount side )
CUT
R3883 C3828
R3884
IC3802
Q3833
Q3826
Q3826
R3885 CUT Silicone
bond Add jumper cable
(GYA1011)
R3872
Q3841
R3887
VR3001
Add jumper cable
*1 *2
`
SERVICE INFORMATION
Date: Dec.25, 2000 No.: SI-D01020-G ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-502MXE/YVLDK/1 A ----
# DETAIL
SYMPTOM 1 When the picture size is zoom mode, the picture darkens because still picture detection
works even if the moving picture is displayed.
CAUSE 1 Microcomputer bug.
SERVICE 1 Change the U-COM Assy (AWZ6520) under the below serial numbers.
REMEDY
FACTORY Service remedy only
COUNTER
-MEASURE
Applicable Serial No.
PDP-502MXE/YVLDK/1 : Q'ty 26
UJSS001932WQ UJSS002055WQ UJSS002511WQ UJSS002519WQ
UJSS002005WQ UJSS002056WQ UJSS002512WQ UJSS002520WQ
UJSS002008WQ UJSS002057WQ UJSS002513WQ
UJSS002009WQ UJSS002058WQ UJSS002514WQ
UJSS002010WQ UJSS002061WQ UJSS002515WQ
UJSS002012WQ UJSS002508WQ UJSS002516WQ
UJSS002013WQ UJSS002509WQ UJSS002517WQ
UJSS002052WQ UJSS002510WQ UJSS002518WQ
NOTE: U-COM Assy's part number does not changed. The stock parts in WPC have modified.
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
PIONEER CORPORATION
NOTE:PARTS CODE Memo: MTV01-067 AN 70
Y.YAMAMOTO ,MANAGER 1:Changeable from old to new.
HE 2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
`
SERVICE INFORMATION
Date: Jan 25, 2001 No.: SI-D01019-G ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-V401/LU/CA ALL
PDP-V401E/WYVLD ALL
# DETAIL
SYMPTOM * A picture turns yellow / A cell defect appears at a part of a panel after 20,000 hours used.
CAUSE * A radiative characteristic of a cell is reduced by Long Term Panel Drive.
This happens only on a panel of the first generation.
SERVICE * Adjust Vofs from 140V to 150V.
REMEDY * Adjust the voltage of VR3601 between TP3601 and TP3602 in Main Power Assy;
AWR1077.
FACTORY * Only Service Remedy
COUNTER
-MEASURE
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
PIONEER SERVICE NETWORK CORPORATION
NOTE:PARTS CODE Memo: MTV01-062
M.EGASHIRA ,MANAGER 1:Changeable from old to new.
2:Not Interchangeable an all.
BS Service Administration Group 3:Interchangeable in both ways Classify: NM-70
BS Service Division 5:Do not use old parts
SERVICE INFORMATION
Date: Jan.11, 2001 No.: SI-D01017 ( 1/1 )
MODEL No. * SER.No. S/M No. PG
PDP-V501X/KUC A ALL ARP2997
PDP-501MX/KUC A ALL ARP2997
PDP-501MX/TYVL A ALL ARP3011
PDP-501MX/TB A ALL ARP3012
# CHANGE
DETAIL 1 When one of the following FET in Y DRIVE A Assy(AWZ6321) or Y DRIVE B Assy
(AWZ6322) have to be changed, pair FET should be replaced with new part at the same time.
REASON 1 When one of FET is defective, the other is also damaged.
Q3005(FS14UM)
PAIR
Q3006(2SK2255)
Q3011(FS14UM) PAIR
Q3012(2SK2255)
* Parts Number is not changed.
Please be sure to replace pair parts.
Otherwise the product is out of order because the other part is also damaged.
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
PIONEER CORPORATION
NOTE:PARTS CODE Memo: MTV01-060 KT, 70
Y.YAMAMOTO ,MANAGER 1;Changeable from old to new.
HE 2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
`
SERVICE INFORMATION
Date: Dec.15,2000 No.: SI-D01016-G ( 1/2 )
MODEL No. * SER.No. S/M No. PG
See to following page
# DETAIL
SYMPTOM 1 The peripheral of PDP is affected by PDP(ex. the sound of radio becomes noisy, the slant
striped noise appears on the picture of TV etc.).
2 The sub field noise (sland striped noise) appears on the picture of PDP.
CAUSE 1.2 Increase of radiation.
It may occurs the above symptom if the shield gusket is not right place when removing rear
panel.
SERVICE 1.2 Before set the rear panel, check the position of shield guscket.
REMEDY
FACTORY Only service remedy.
COUNTER
-MEASURE
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
PIONEER SERVICE NETWORK CORPORATION
NOTE:PARTS CODE Memo: MTV01-
053
M.EGASHIRA ,MANAGER 1:Changeable from old to new.
2:Not Interchangeable an all.
BS Service Administration Group 3:Interchangeable in both ways Classify:
BS Service Division 5:Do not use old parts
( 2/2 )
MODEL No. * SER.No. S/M No. PG
PDP-V400/LU/CA A ALL
PDP-V400E/WYO A ALL
PDP-V401/LU/CA A ALL
PDP-V401E/WYVLD A ALL
PDP-V402/LUBW/CA A ALL
PDP-V402E/WYVLDK A ALL
`
SERVICE INFORMATION
Date: Dec.13,2000 No.: SI-D01015-G ( 1/2 )
MODEL No. * SER.No. S/M No. PG
See to following page
# DETAIL
SYMPTOM A Subfield noise (diagonal pattern noise is on a picture)
CAUSE A Drive noise comes into the small level signal lines.
SERVICE Change of a screw from PMB30P080FZK to ABA1283.
REMEDY
FACTORY Same as the service remedy.
COUNTER
-MEASURE
Change this screw
rear view
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
PIONEER SERVICE NETWORK CORPORATION
NOTE:PARTS CODE Memo: MTV01-
052
T. Nakagawa ,MANAGER 1:Changeable from old to new.
2:Not Interchangeable an all.
DP Technical Support Group 3:Interchangeable in both ways Classify:
Service Support Division 5:Do not use old parts
( 2/2 )
MODEL No. * SER.No. S/M No. PG
PDP-V400/LU/CA A
PDP-V400E/WYO A
PDP-V401/LU/CA A
PDP-V401E/WYVLD A
PDP-V402/LUBW/CA A
PDP-V402E/WYVLDK A
`
SERVICE INFORMATION
Date: Nov.27,2000 No.: SI-D01014-G ( 1/2 )
MODEL No. * SER.No. S/M No. PG
PDP-502MX/LUCBW A ALL
PDP-502MXE/YVLDK B ALL
PDP-505HD/KUC C ALL
# DETAIL
SYMPTOM 1 Picture sometimes mutes or freezes, horizontal short line noise appears.
Power Down
CAUSE 1 Poor contact of the connection between analog video and digital video assy.
In S/M: A33(CN2901)-D20(CN3403),A34(CN2902)-D21(CN3404)
SERVICE 1 Correspond analog video kit according to the table below.
REMEDY
FACTORY Service Remedy only
COUNTER
-MEASURE
changed block 1 2 3 4 5 6
PDP-502MX serial No. 1-300 300-750 751-2900 2901-3656 3657-4285 4286-
analog(mother) AWV1769 <-- <-- <-- <-- AWV1832
analog(separated) AWZ6441 <-- <-- <-- <-- AWZ6487
PDP-502MXE serial No. 1-50 51-900 901-3225 3226-3599 3600-4625 4626-
analog(mother) AWV1790 <-- <-- <-- <-- AWV1833
analog(separated) AWZ6448 <-- <-- <-- <-- AWZ6488
PDP-505HD serial No. 1-150 - 151-950 951-1250 1251-1634 1635-
analog(mother) AWV1769 <-- <-- <-- <-- AWV1836
analog(separated) AWZ6441 <-- <-- <-- <-- AWZ6490
All Models
digital AWV1815 <-- <-- <-- <-- AWV1838
PDP-502MX Service When analog video is changed GXX1182 GXX1182 GXX1182 GXX1182(refer to 2/2 NOTE1) AWV1832(AWZ6487)
Remedy When digital video is changed AWV1815 AWV1815 AWV1815 AWV1815 AWV1838
PDP-502MXE Service When analog video is changed GXX1183 GXX1183 GXX1183 GXX1183(refer to 2/2 NOTE1) AWV1833(AWZ6488)
Remedy When digital video is changed AWV1815 AWV1815 AWV1815 AWV1815 AWV1838
PDP-505HD Service When analog video is changed GXX1185 GXX1185 GXX1185 GXX1185(refer to 2/2 NOTE1) AWV1836(AWZ6490)
Remedy When digital video is changed AWV1815 AWV1815 AWV1815 AWV1815 AWV1838
Ref CURRENT PARTS CO NEW PARTS
* # SYMBOL/DESCRIPTION PART NUMBER DE PART NUMBER SYMBOL/DESCRIPTION
A 1 Add - GXX1182 Analog Video Kit
B 1 Add - GXX1183 Analog Video Kit
C 1 Add - GXX1185 Analog Video Kit
PIONEER CORPORATION
NOTE:PARTS CODE Memo: MTV01-046 AN 69
Y.YAMAMOTO ,MANAGER 1:Changeable from old to new.
HE 2:Not Interchangeable an all.
Service Engineering Section 3:Interchangeable in both ways Classify:
Service Division 5:Do not use old parts
< NOTE1 > ( 2/2 )
Changed point in serial block "4" and "5" have two kind of digital video Assy with
different position of resistors.
Correspond according to following when coaxial cable is changed.
/ Coaxial cables are used by following combination according to connecting digital
video.
/ Remove resistors of R3475,R3476,R3477 and place them at location of
R3405,R3407,R3408 when it is necessary.
combination of Assy and connectors : ANP1931/1932 are part number of substrate.
analog video digital video AWV1815(ANP1932)
(ANP1931) A-F G(R3475,3476,3477) G(R3405,3407,3408)
suffix A-F no change exchange resistors ADE1182(2pcs)
(ADE1175/1182)
suffix G ADE1180(2pcs) no change no change
(ADE1181(2pcs)+ADX2577) (ADE1181/1180)
R3405,3407,3408,3475,3476,3477 are same all resistor(10 ohms)
/ position of R3475,3476,3477 and R3405,3407,3408 (fig,1)
ADE1180 or ADE1182 ADX2577
combination list of analog video kit
cable ADE1180(2pcs)
analog video
PDP-502MX/LUCBW AWZ6441(ANP1931-A-F) GXX1182
PDP-502MXE/YVLDK AWZ6448(ANP1931-G) GXX1182
PDP-505HD/KUC AWZ6450(ANP1931-G) GXX1182
`
SERVICE INFORMATION
Date: Oct. 5, 2000 No.: SI-D01013-G ( 1/1 )
MODEL No. * SER.No.