| Make | Model | Problem | Solution | Date |
| | | |
| Found: 1771
|
| Ferguson | TX100 | Dead - for 10 mins. | C121 o/c. | 14-09-04 |
| Ferguson | TX100 | Dead - from cold - ok after 20 seconds. | TR8 s/c can burn up R143. | 14-09-04 |
|
|
| Ferguson | TX100 | Dead - int to start with | Dry joints chopper tfmr sec chassis con | 14-09-04 |
| Ferguson | TX100 | Dead - intermittent. | Drys on mains supply to PCB , TR8 ( BC372 ) o/c line driver | 14-09-04 |
| Ferguson | TX100 | Dead - keeps blowing fuse. | TR6 s/c , TR10 s/c. | 14-09-04 |
| Ferguson | TX100 | Dead - low HT at 50v | C121 22µ ht decoupler leaky | 14-09-04 |
| Ferguson | TX100 | Dead - no 12v rail - 120v & 20v rail ok. | 120v & 20v rail ok , R73 ( 9k1 ) o/c. | 14-09-04 |
| Ferguson | TX100 | Dead - no 200v rail. | T2 DJ on secondary. | 14-09-04 |
| Ferguson | TX100 | Dead - no line drive. | IC9 15v reg. | 14-09-04 |
| Ferguson | TX100 | Dead - no line drive. | C66 o/c. | 14-09-04 |
| Ferguson | TX100 | Dead - no volts on pin 9 of IC7. | R117/R118 o/c. | 14-09-04 |
| Ferguson | TX100 | Dead - R116 burnt up. | SCR1 s/c , R116. | 14-09-04 |
| Ferguson | TX100 | Dead - R143 burnt up - from cold. | TR8 s/c. | 14-09-04 |
| Ferguson | TX100 | Dead - relay chattering. | TR10 fibre washer has pin hole in it. | 14-09-04 |
| Ferguson | TX100 | Dead - relay RL1 chattering. | TR73 o/c , drys on C137 s/c , D26 s/clTR10 s/c or washer. | 14-09-04 |
| Ferguson | TX100 | Dead - static on screen customer said. | Fit 10MR across neutral poles of on/off switch. | 14-09-04 |
| Ferguson | TX100 | Dead 2.5A fuse blown | Green faces when fuse replaced - degaussing therm faulty | 14-09-04 |
| Ferguson | TX100 | Dead with 120v on LOPTr | No line dr - Tr8 BC372, R143 6R8 hi res & LOPTx | 14-09-04 |
| Ferguson | TX100 | Dead with chopper TX ( T1 ) ticking. | C121 ( 47uF/160V ) low value. | 14-09-04 |
| Ferguson | TX100 | Dead with faint hum from spkr | HT ok on dummy load - low when connected normally - LOPTx | 14-09-04 |
| Ferguson | TX100 | Dead with machine gun type tripping | LOPTx s/c winding | 14-09-04 |
| Ferguson | TX100 | Dead with squeal from LOPTx | LOPTx faulty | 14-09-04 |
|
|
| Ferguson | TX100 | Dead with ticking chopper tfmr | C121 47µ 160v low | 14-09-04 |
| Ferguson | TX100 | Dead. | BC372 s/c plus feed R143 o/c , D28 ( BY299 ) s/c. | 14-09-04 |
| Ferguson | TX100 | Dead. | R115 ( 270k ) high ( 1.2R ) , check print bt IC9 & R143 , TR8 o/c | 14-09-04 |
| Ferguson | TX100 | Dead. | Relay u/s , C115 s/c ( 8n2 ) R113 overheating. | 14-09-04 |
| Ferguson | TX100 | Dead. | R108 o/c. | 14-09-04 |
| Ferguson | TX100 | Dead. | Approx 119v on D19 T3 or cracks in print around P2 & 10. | 14-09-04 |
| Ferguson | TX100 | Dead. | D20 s/c. | 14-09-04 |
| Ferguson | TX100 | Dead. | C112 o/c. | 14-09-04 |